TM 9-2815-225-34&P 3-63.  FUEL PUMP TESTING AND CALIBRATION (Contd) LOCATION/ITEM ACTION REMARKS o.  Removing Fuel Pump From Test Stand 106.   AFC adjusting tool (91) Remove from fuel pump main housing (51). 107.   AFC cover plate (42) and a.  Install on fuel pump main restrictor (41) housing (51). b.  Secure with three screws (115). Bottom screw (115) should have a hole drilled in it.  Tighten screws (115) to 30-45 lb-in. (3.3-5.0 Nm). 108.   All hoses Remove from fuel pump assembly (71) and test stand (1). 109.   Check valve (39) Remove from fuel pump main housing (51). 110.   Tee fitting (85) Remove from bleed drain fitting (87). 111.   Pump discharge fitting Remove from shutdown solenoid assembly (80) valve (40). 112.   Inlet adapter assembly (75) Remove from gear pump (47). 113.   Throttle lever (48) and Remove spring. adapter ring (67) 114.   Fuel pump assembly (71), a.  Remove from test stand (1). adapter ring (67), and adapter bracket (66) b.  Separate. 3-514