TM 9-2815-225-34&P 3-14. VIBRATION DAMPER AND CRANKSHAFT PULLEY REMOVAL THIS TASK COVERS: Removal INITIAL SETUP: APPLICABLE MODELS REFERENCES (TM) All None SPECIAL TOOLS TROUBLESHOOTING REFERENCES None Para. 2-8 TEST EQUIPMENT EQUIPMENT CONDITION None Engine mounted on maintenance stand (para. 3-13). MATERIALS/PARTS SPECIAL ENVIRONMENTAL CONDITION None Work area clean and away from blowing dust and dirt. PERSONNEL REQUIRED Automotive repairman MOS 63H GENERAL SAFETY INSTRUCTIONS None LOCATION/ITEM ACTION REMARKS Removal CAUTION Do  not  pound  on  vibration  damper  with  hammer  or  pry  with  other  tools  during  removal. These tools may damage vibration damper. Six hexagon screws (1), Remove from crankshaft (5). Do not let crankshaft (5) turn washers (2), vibration when removing screws (1).  Lock damper (3), and crankshaft crankshaft (5) at flywheel end to pulley (4) keep from turning.  Hold vibration damper (3) and crankshaft pulley (4) when removing last screw (1) to avoid dropping vibration damper (3). FOLLOW-ON TASKS: For repair of vibration damper and crankshaft pulley (para. 3-36). For installation of vibration damper and crankshaft pulley (para. 3-79). 3-26