TM 9-2815-225-34&P 3-81. OIL PAN INSTALLATION (Contd) LOCATION/ITEM ACTION REMARKS Installation (Contd) 19. Adapter (35) and oil suction Install on oil pump (16) and hand- hose (25) (M915/Big Cam I) tighten hose nut until snug, then tighten nut an additional 1 to 1-1/4 turn. 20. Two screws (26) Tighten to 30-35 lb-ft (41-48 Nm). (M915/Big Cam I) 21. Oil suction hose (25) Tighten nut on oil suction hose (M915/Big Cam I) (25) mounting flange until nut is against stop on mounting flange. 22. Screw (12) (M915/Big Remove one screw (12) from Remove sixth screw from front of Cam I) left side flange of oil pan (37). flange on left side of oil pan (37). 23. Bracket (31), screw (32), a.  Install on sixth hole from and new lockwasher (33) front on left side of oil pan (37). (M915/Big Cam I) b.  Tighten screw to 35-40 lb-ft (41-48 Nm). 3-628