TM 9-2815-225-34&P 3-25. FLEXPLATE OR FLYWHEEL, FLYWHEEL HOUSING, AND REAR COVER REMOVAL (Contd) LOCATION/ITEM ACTION REMARKS Removal (Contd) NOTE Perform step 11 for M915A1/Big Cam III only. 11. Six screws (33), washers (13), Remove from crankshaft (22). Lock flexplate (31) to prevent washer bearing (32), crankshaft (22) from rotating flexplate (31), and retaining when removing screws (33). plate (30) NOTE Perform step 12 for M915/Big Cam I only. 12. Preformed packing (34) Remove from crankshaft (22). Discard preformed packing (34). 13. Four screws (38), lock- Remove from oil pan (25) and On steel oil pans (M915A1/Big washers (37), and rear cover (27). Cam III), two of the four washers (36) screws (38) have been eliminated. 14. Eight screws (28), rear Remove from cylinder block (1) Discard gasket (26). cover (27), and gasket (26) and crankshaft (22). 15. Rear main seal (35) Remove from rear cover (27). Discard seal (35). FOLLOW-ON TASKS: For repair of flexplate or flywheel, flywheel housing, and rear cover (para. 3-38). For installation of flexplate or flywheel, flywheel housing, and rear cover (para. 3-80). 3-60