| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-1
(35) Remove and Discard Camshaft Bearings.
NOTE
Camshaft bearings installed in engines with high mileage (300,000 to 600,000
miles) should be replaced during overhaul. Bearings installed in engines with less
accumulated mileage can be reused, providing original camshaft is used and
bearing inside diameter does not exceed 2.5008 in. (63.5203 mm). Anytime the
camshaft is replaced, the bearings must also be replaced, regardless of their
condition.
(a) Slip slide hammer onto rod.
(b) Screw rod into shaft assembly. Ensure rod is tight in shaft assembly.
(c) Slide guide on shaft assembly against roll pin.
Change 1 3-55
|
||
|
||
