| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-1
CAUTION
DO NOT DRILL HOLE ALL THE WAY THROUGH OIL SEAL CASING. DRILLING
HOLE THROUGH REAR FACE OF CASING CAN DAMAGE GEAR CASE COVER.
(4) Using a no. 31 drill bit (0.120 in. [3.048 mm]) and drill, insert drill bit into drill pilot and carefully drill hole
through front face of oil seal casing.
(5) Remove drill bit and drill pilot.
(6) Install drill pilot in second and third holes of top plate and drill two more pilot holes in front face of oil seal
casing.
(7) Remove drill pilot.
(8) Screw three ST-1259-6 seal puller screws into top plate until pointed tips of screws penetrate oil seal front
casing.
(9) Carefully turn seal puller screws into oil seal from casing. Pointed tips of screws are followed by no. 10-16
sheet metal screw threads which will thread themselves into oil seal front casing.
3-153
|
||
|
||
