Remove crankshaft oil seal. (cont)

Custom Search

Back
Remove crankshaft oil seal.

Up
TM-9-2815-226-34-1 Engine Diesel 6 Cylinder Inline Turbocharged Cummins NTC-400 BC2 Manual

Next
Replace accessory drive oil seal.

TM 9-2815-226-34-1

CAUTION

TAKE CARE WHEN BOTTOMING OUT SCREWS TO PREVENT THEIR DAMAGE.

(10) Continue turning screws until they bottom out in seal casing.

(11) While holding top plate against crankshaft, remove vibration damper mounting capscrews which secure top

plate to crankshaft.

(12) Install ST-1259-7 main puller screw through center threaded hole of top plate.

NOTE

New crankshaft oil seal will be installed upon final assembly of engine.

(13) Turn main puller screw until crankshaft oil seal is removed from gear case cover. Discard seal.

3-154