| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-1
b. Inspect housing.
(1) Check housing for cracks or mating surfaces imperfections. Discard if defects found.
(2) Check edges of expansion cup plug bores in housing for sharp edges or burrs.
(3) If damage during removal of expansion cup plug is found, mark bore for repair.
c. Inspect cam follower levers.
(1) Check cam follower lever bushings for scratches, pitting, or scoring.
(2) Mark bushing for replacement if defects found.
(3) Measure inside diameter of bushing.
(4) Mark bushing for replacement if inside diameter exceeds 0.752 in. (19.100 mm).
(5) Check follower lever insert for scoring.
3-214
|
||
|
||
