| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
z. With a dial indicator, measure total end clearance. Clearance must be within 0.006 - 0.018 in. (0.15 - 0.46 mm).
If end clearance is incorrect, disassemble turbocharger and check bearing for defects.
aa. Apply thread sealant to oil inlet fitting and install fitting. Torque fitting to 20 - 25 ft lbs. (27 - 34 N m).
ab. Apply thread sealant to oil drain fitting and install fitting. Torque fitting to 50 ft lbs (68 Nm).
ac. Tape all openings to prevent entry of dirt and abrasives.
3-389
|
||
|
||
