| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
(1) Push shaft towards side of bore.
(2) Check clearance between tip of wheel vanes and bore. Clearance must be 0.006 - 0.028 in. (0.152 - 0.711 mm)
at compressor end and 0.008 - 0.043 in. (0.023 - 1.092 mm) at turbine end. If unable to meet clearance(s)
disassemble turbocharger and remeasure housing bores.
388
|
||
|
||
