| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
k. Install fuel injector assembly.
CAUTION
HANDLE INJECTORS WITH CARE. TURNING INJECTOR UPSIDE DOWN WILL
ALLOW PLUNGER TO DROP OUT. DAMAGED PLUNGER WILL CAUSE ENGINE
FAILURE.
(1) Install new O-rings in grooves on injector.
(2) Lubricate O-rings with engine oil.
CAUTION
DO NOT USE WOODEN HAMMER HANDLE OR SIMILAR TOOL TO INSTALL
INJECTOR. DIRT OR SPLINTER MAY DROP INTO PLUNGER LINK SEAT CAUSING
EARLY FAILURE OF ENGINE.
(3) Start injector into bore. Guide it by hand until alined in bore and ensure that it is not bound.
3-427
|
||
|
||
