| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
s.
Install front engine support.
(1)
Place front engine support in position on front gear case cover.
NOTE
Two top bolts which fit in support slots have flat and lockwashers.
(2)
Secure support with capscrews and lockwashers. Torque capscrews to 55 ft lbs (75 N m).
t.
Install vibration damper and pulley.
(1)
Wipe vibration damper and pulley clean and secure damper to pulley with capscrews and
lockwashers. Torque capscrews to 85 ft lbs (115 Nm).
CAUTION
DO NOT USE LUBRICANT ON PULLEY OR CRANKSHAFT MATING SURFACES.
(2)
Wipe mating surfaces with clean dry cloth.
(3)
Aline capscrew holes and tap vibration damper assembly into position with softface hammer.
3-439
|
||
|
||
