TM 9-2815-237-34
2-32. FUEL INJECTION PUMP REPAIR (Cont’d)
11. Inspect throttle shaft bushings (1) for damage. If damaged, perform steps 12 through 20 using
throttle and shutoff shaft bushing installation kit. If not, go to step 21.
12. Install brace into housing (2) to prevent distortion of housing (2) during bushing (1) removal.
13. Install rod through bushings (1).
14. Install bushing guide, two washers, and nuts.
15. Tighten nuts until bushing (1) is removed from housing (2). Remove tools and discard bushing (1).
2-100
|
|
