TM 9-2815-237-34
2-32. FUEL INJECTION PUMP REPAIR (Cont’d)
16.
17.
18.
19.
20.
Install brace and rod into housing (2).
Apply sealing compound to outside diameter of bushing (1).
Install bushing (1), bushing guide, two washers, and nuts on rod.
Tighten nuts
housing (2).
Repeat steps
until bushing (1) is past flush with bushing boss (3) on housing (2). Remove tools from
12 through 19 for opposite bushing, if required.
2-101
|
|
