TM 9-2815-237-34
2-186
Change 1
2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES (Cont’d)
aa. Crankshaft Pulley
1.
Apply sealing compound to four capscrews (1).
2.
Install crankshaft pulley (2) and spacer (2.1) (if removed) on torsional damper (3) with four
capscrews (1).
3.
Hold flywheel stationary with pry bar and tighten capscrews (1) to 48 lb-ft (65 N•m).
|
|
