TM 9-2815-237-34
2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES (Cont’d)
bb. Fan Drive and Water Pump Pulley
1. Apply sealing compound to four socket head screws (8).
2. Install water pump pulley (6) on water pump (7) with four socket head screws (8).
3. position pry bar between water pump pulley (6) and crankshaft pulley (2) and apply pressure tO
prevent rotation. Using 6 mm hex head driver, tighten socket head screws (8) to 20 lb-ft (27 N•m).
4. Apply sealing compound to four socket head screws (4).
5. Install fan drive (5) on water pump pulley (6) with four socket head screws (4). Repeat step 3. Using
5/16-in. hex head driver, tighten socket head screws (4) to 45 lb-ft (61 N•m).
FOLLOW-ON TASKS: l Remove engine from repair stand (para. 2-14).
l Perform engine run-in (para. 2-43).
2-187
|
|
