TM 9--2815--247--34
0015 00--19
INTAKE AND EXHAUST VALVE AND METERING PUMP TIMING --
CONTINUED
0015 00
Adjust -- Continued
18. Rotate flywheel (8) counterclockwise, as viewed from the flywheel end, approximately 140° until “6L INT CLOSE
0.100 CLR” timing mark (20) aligns with timing mark (10), then rotate flywheel an additional 360° until “6L INT
CLOSE 0.100 CLR” timing mark (20) aligns with timing mark (10) the second time.
Figure 7
8
20
10
19. Remove retaining ring (27) from bevel gearshaft (28) on left bank. Discard retaining ring.
Figure 10
28
27
|
|
