TM 9--2815--247--34
0021 00--6
ENGINE AND CONTAINER REPLACEMENT -- CONTINUED
0021 00
Installation -- Continued
6. Secure transmission adapter (12) to support flange (13) using seven lockwashers (11) and seven nuts (10).
7. Attach gasket (9) to upper half of container (8).
8. Attach sling (7) to upper half of container (8) and to hoist.
9. With helper to guide the load, carefully lower container upper half (8) in place over engine (21).
10. Secure container halves (8) and (22) using 48 screws (6), 48 lockwashers (5) and 48 nuts (4).
11. Remove sling (7) from container half (8) and hoist.
12. Install valve core (2) into pneumatic valve (3) then fill container assembly (1) to 5 psi (34.475 Kpa) gauge pres-
sure using clean dry air.
Figure 67
12
11
10
9
22
7
8
21
6
5
4
2
3
1
13
END OF TASK
|
|
