TM 9--2815--247--34
ROCKER ARM COVER ASSEMBLY REPLACEMENT -- CONTINUED
0026 00
Installation -- Continued
19. Apply lubricant to threads of four screws (1) prior to installation.
20. Install access cover (4) and spacer plate (3) on exhaust side of valve cover using new gasket (5), two screws (1),
and two flat washers (2).
21. Install access cover (4) on intake side of valve cover, using new gasket (5), two screws (1), and two flat washers
(2).
22. Torque four screws (1) to 150--175 lb--in (17--20 NSm).
Figure 9
1
2
3
4
5
NOTE
FOLLOW--ON MAINTENANCE:
Install fuel/water separator (TM 9--2350--292--20)
Install engine oil cooler frames
(TM 9--2350--292--20)
Install fuel nozzle and holder (WP 0036 00)
Install cylinder oil drain back tubes
(TM 9--2350--292--20)
Install fuel injector tubes (WP 0037 00)
Install fuel pump (TM 9--2350--292--20)
END OF TASK
0026 00--13/14 blank
|
|
