TM 9--2815--247--34
0036 00--3
FUEL INJECTOR NOZZLE AND HOLDER REPAIR -- CONTINUED
0036 00
Removal -- Continued
5. Turn shaft (8) of mechanical puller (9) counter--clockwise to the end of thread.
6. Install mechanical puller (9) over nut (10) and rest on spacer (11).
7. Turn mechanical puller (9) clockwise to engage nut (10) threads. Continue turning until shaft (8) bottoms out.
8. Using an open--end wrench, turn puller plain nut (12) clockwise to remove nut (10) and associated parts.
Figure 34
8
8
12
12
9
9
11
10
VALVE
COVER
CYLINDER
HEAD
VALVE
COVER
CYLINDER
HEAD
NOTE
If the nozzle was removed with a special puller, nozzle
will need to be reassembled prior to testing. Perform
steps 5 through 9.
|
|
