TM 9--2815--247--34 0036 00--8 FUEL INJECTOR NOZZLE AND HOLDER REPAIR -- CONTINUED 0036 00 Disassembly -- Continued WARNING CAUTION The nozzle tip consists of a mated pair nozzle valve and nozzle body. If damage occurs to either piece, both pieces must be replaced. NOTE It may be necessary to soak the nozzle tip in carbon re- moving compound to separate. 6.   Separate nozzle valve (27) from nozzle body (28). 7.   Remove nozzle and holder seat (29), shims (30), and spacer ring (31) from body (6). 8.   Remove retainer (2) and preformed packing (32) from body (6). Discard preformed packing. 9.   Remove fuel inlet stud (5) from body (6). Figure 34 5 6 27 28 29 30 31 2 32