TM 9--2815--247--34
0036 00--14
FUEL INJECTOR NOZZLE AND HOLDER REPAIR -- CONTINUED
0036 00
Assembly -- Continued
5. Install nozzle valve (27) in nozzle body (28).
6. Install nozzle tip (26), spacer (11), seat (25), spring (24), and sleeve (23) in nut (10).
7. While holding nut (10) and associated parts together as an assembly, install nut (10) on nozzle and holder (3).
8. Torque nut (10) to 87--92 lb--ft (118 --125 NSm).
9. Test nozzle and holder (3) and adjust to achieve proper specifications. Refer to Test.
Figure 34
10
3
23
24
25
11
26
27
28
|
|
