TM 9--2815--247--34 FUEL/WATER SEPARATOR CONTROL MOUNTING PLATE REPLACEMENT 0047 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Materials/Parts Lockwashers (4) (item 145, WP 0102 00) Equipment Conditions Engine level on flat surface (WP 0021 00) Water separator control removed (TM 9--2350--292--20) Water solenoid valve removed (TM 9--2350--292--20) References TM 9--2350--292--20 Removal 1.   Remove four bolts (1), four lockwashers (2), clamp (3), and mounting plate (4) from engine. Discard lockwashers. 2.   Inspect parts for damage and replace as required. Installation Install mounting plate (4) and clamp (3) and secure with four bolts (1) and four new lockwashers (2). Figure 42 1 2 3 1 2 4 NOTE FOLLOW--ON MAINTENANCE: Install water solenoid valve (TM 9--2350--292--20) Install water separator control (TM 9--2350--292--20) END OF TASK 0047 00--1/2 blank