TM 9--2815--247--34
0048 00--4
THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS
REPAIR -- CONTINUED
0048 00
Disassembly -- Continued
11. Remove two throttle control spacers (32) and spring (9) from straight shaft (16).
WARNING
12. Remove retaining ring (33) from straight shaft (16). Discard retaining ring.
13. Remove machine screw (34), plain nut (35), and angle bracket (36) from governor cross shaft control lever as-
sembly (37).
14. Remove governor cross shaft control lever assembly (37), two bearings (38), and two retaining rings (39) as an
assembly, using a suitable puller, from straight shaft (16).
15. Remove two retaining rings (39) and two bearings (38) from governor cross shaft control lever assembly (37).
Discard retaining rings.
16. Remove two machine bolts (40) and two lockwashers (41) securing electrical solenoid (42) to solenoid housing
assembly (12). Discard lockwashers.
17. Disengage rigid connecting link (43) from solenoid control housing (44) and remove electrical solenoid (42) with
gasket (45). Discard gasket.
18. Remove spring pin (46), rigid connecting link (43), spring retainer (47), spring (48), and spring retainer (49) from
electrical solenoid (42).
Figure 47
40
41
42
45
49
48
47
46
43
32
9
32
33
38
39
37
39
38
16
44
36
35
34
12
|
|
