TM 9--2815--247--34
0064 00--2
ENGINE CRANKSHAFT REPAIR -- CONTINUED
0064 00
Removal -- Continued
3. Remove two cotter pins (1) and two slotted nuts (2) from left side of block. Discard cotter pins.
4. Using a suitable brass rod, push the 13 tie rods (4) through the block and remove from the left side.
5. Push the lower No. 7 tie rod (4) through the block and remove from the right side.
Figure 2
4
4
4
4
4
4
4
2
1
6. Separate cotter pins (1), slotted nuts (2), and washers (3) from 14 tie rods (4). Discard cotter pins.
Figure 2
1
2
3
4
|
|
