TM 9--2815--247--34
0064 00--4
ENGINE CRANKSHAFT REPAIR -- CONTINUED
0064 00
Removal -- Continued
CAUTION
Use caution when removing main bearing caps so that
lower main sleeve bearing half does not accidentally drop
out. Sleeve bearing halves can be easily damaged.
12. Gently tap the main bearing cap (9) free of the block using the slide hammer on puller (10).
Figure 2
10
9
CAUTION
Do not use a scribe or other sharp instrument for marking
bearing halves. Use a grease pencil for marking bearing
halves. Failure to comply will result in premature failure.
13. Remove the main bearing cap (9) and lower main sleeve bearing half (13).
14. Mark lower main sleeve bearing half (13) with its respective location, using a grease pencil, for identification; e.g.,
“1 cap”, “2 cap”, etc.
15. Remove remaining six main bearing caps (9) and lower main sleeve bearing halves (13) in a similar manner, by
repeating steps 11 through 14.
Figure 2
13
9
|
|
