TM 9--2815--247--34 0071 00--1 LUBRICATING NOZZLE ASSEMBLY REPAIR. 0071 00 THIS WORK PACKAGE COVERS: Removal, Repair, Installation, Adjust INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Target fixture (item 59, WP 0103 00) Bending tool (item 57, WP 0103 00) Oil passage plug (item 7, WP 0104 00) Torque wrench (item 49, WP 0103 00) Hose (item 70, WP 0103 00) maximum 6 needed Hose clamp (item 71, WP 0103 00) maximum 11 needed Machinist vise (item 83, WP 0103 00) Materials/Parts Preformed packings (6) (item 64, WP 0102 00) Lubricant (item 12, WP 0100 00) Equipment Conditions Engine on maintenance stand (WP 0056 00) Crankshaft removed (WP 0064 00) Cylinder head assembly and piston removed (WP 0059 00) Removal NOTE The engine has six piston oil sprayer assemblies. The following procedures will apply to one or all assemblies. If all oil sprayer assemblies are removed, note location of each prior to removal to aid installation. 1.   Remove two screws (1) and remove piston oil sprayer assembly (2). 2.   Remove preformed packing (3). Discard preformed packing. 3.   Remove four crankcase protectors (4). Refer to WP 0059 00. Figure 8 1 2 3 4 4 2