TM 9--2815--247--34
0076 00--6
CAMSHAFT, DRIVE GEARS, AND ASSOCIATED PARTS REPAIR --
CONTINUED
0076 00
Inspection -- Continued
5. Inspect camshaft bearing sleeves (37) for pitting, galling, burrs or nicks. Replace bearing sleeves that show pit-
ting, galling, burrs, nicks or any other forms of destruction to the bearing surface.
NOTE
Fine scratches on bearing sleeves are not cause for re-
jection.
6. Spread a thin coat of Prussian blue over the backs of the bearing sleeves (37) and install in their original location
on cylinder assembly (38) and rocker cover (39).
7. Apply lubricant to threads of four screws (40).
8. Secure rocker cover (39) to its matching cylinder assembly (38) with four screws (40) and four new preformed
packings with retainers (41).
9. Torque four screws (40) to 23--27 lb--ft (31--37 NSm).
Figure 5
37
39
41
40
38
41
40
41
41
40
40
|
|
