TM 9--2815--247--34
0076 00--7
CAMSHAFT, DRIVE GEARS, AND ASSOCIATED PARTS REPAIR --
CONTINUED
0076 00
Inspection -- Continued
10. Measure the inside diameter (42) of camshaft bearing in cylinder. Replace bearing sleeve if not within the follow-
ing limits.
REF
NO.
POINT OF MEASUREMENT
SIZES AND FITS OF NEW PARTS
inches (mm)
WEAR LIMITS
42
Inside diameter of camshaft
bearing in cylinder
1.3115 (33.3121)
1.3135 (33.3629)
1.3140 (33.3756)
11. Remove valve cover (39) and bearing sleeves (37).
12. Inspect bearing sleeves (37) for Prussian blue transfer and replace bearing sleeves that do not make at least 75
percent contact.
13. Repeat steps 7 through 12 if bearing sleeve (37) is replaced.
Figure 5
37
39
42
|
|
