TM 9--2815--247--34
0076 00--9
CAMSHAFT, DRIVE GEARS, AND ASSOCIATED PARTS REPAIR --
CONTINUED
0076 00
Installation
1. Install camshaft bearing sleeves (37) in each matching cylinder and cover assembly (38 and 39).
2. Place camshaft assembly (16) into position on cylinder assemblies (38) and (44).
3.
Attach mechanical housing (31) to cylinder 6L or 6R (44) with two screws (11), two new lockwashers (12) and two
flat washers (13). Do not tighten screws (11) at this time.
4.
Install 20 screws (14) into camshaft flanges (15). Do not tighten screws (14) at this time.
5.
Tighten two hose clamps (10).
Figure 10
13
12
11
10
16
37
39
38
38
38
38
38
44
31
14
15
|
|
