TM 9--2815--247--34 0079 00--2 CRANKSHAFT DAMPER AND OIL FILTER HOUSING ASSEMBLY REPAIR -- CONTINUED 0079 00 Removal -- Continued 2.   Remove six self--locking nuts (4) and six flat washers (2). Discard self--locking nuts. 3.   Attach suitable lifting sling and hoist to lifting eyes (5). WARNING WARNING Damper and oil filter housing is heavy, lift with caution. CAUTION Do not allow damper and oil filter housing to rest on studs after housing is separated from crankcase and oil transfer tubes. Extreme caution must be taken to prevent dam- age to machined surfaces on the oil pan, crankcase part- ing line, and the damper and oil filter housing. 4.   With a slight amount of lifting pressure from the hoist, carefully remove the damper and oil filter housing (3). Figure 14 5 4 4 4 2 2 5 3 2 2 4 2 4 2