TM 9--2815--247--34
0080 00--2
OIL PAN ASSEMBLY REPAIR -- CONTINUED
0080 00
Removal -- Continued
2. Remove 12 screws (5) and 12 flat washers (3) securing damper housing (6) to oil pan (4).
Figure 14
5
3
4
6
CAUTION
Leave one nut and washer installed on each side of the
oil pan, near the center of the pan, to prevent oil pan from
falling and being damaged.
3. Remove 27 self--locking nuts (7) and 27 flat washers (3) from each side of oil pan (4). Discard self--locking nuts.
4. Attach sling assembly (8) to engine lifting eyes (9) and to a suitable lifting device.
5. Take slack out of lifting device and remove four screws (10) and four flat washers (11).
Figure 70
9
9
8
10
11
3
7
4
|
|
