TM 9--2815--247--34 0084 00--1 STARTER DRIVE MECHANISM REPAIR 0084 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Inspection, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Torque wrench (item 52, WP 0103 00) Slide hammer puller assembly (item 27, WP 0103 00) Mechanical adapter (item 1, WP 0103 00) Outside micrometer caliper set (item 9, WP 0103 00) Inside micrometer caliper set (item 10, WP 0103 00) Telescoping gauge set (item 16, WP 0103 00) Bolts (3) (item 90, WP 0103 00) Snap ring pliers (item 44, WP 0103 00) Materials/Parts Retaining ring (item 117, WP 0102 00) Wire, nonelectrical (item 22, WP 0100 00) Lubricant (item 14, WP 0100 00) Materials/Parts -- Continued Preformed packing (item 81, WP 0102 00) Preformed packing (item 84, WP 0102 00) Plain encased seal (item 134, WP 0102 00) Gasket (item 21, WP 0102 00) Self--locking nuts (4) (item 55, WP 0102 00) Safety goggles (item 28, WP 0100 00) Equipment Conditions Engine on maintenance stand (WP 0056 00) Spur gear (accessory drive) removed (WP 0068 00) Removal 1.   Remove four self--locking nuts (1) and four flat washers (2) from mounting bracket (3). Discard self--locking nuts. 2.   Remove mounting bracket (3) and gasket (4). Discard gasket. 3.   Remove plain slotted nut (5) securing spur gear (6) to spur gearshaft (7). Figure 29 1 2 3 4 5 6 7