TM 9--2815--247--34
ACCESSORY DRIVE HOUSING BASE ASSEMBLY REPAIR -- CONTINUED
0087 00
Installation -- Continued
3. Install accessory base assembly (2) onto crankcase.
4. Apply lubricant to six cap screws (5) and ten engine studs (15).
5. Secure accessory base assembly (2) to crankcase using six cap screws (5), six flat washers (6), ten slotted nuts
(3), and ten flat washers (4).
6. Tighten six cap screws (5) and ten slotted nuts (3) to 23--25 lb--ft (31--34 NSm).
7. Secure ten slotted nuts (3) with ten new cotter pins (2).
Figure 31
15
2
3
4
5
6
1
NOTE
FOLLOW--ON MAINTENANCE:
Install accessory drive housing assembly and associated
parts (WP 0085 00)
END OF TASK
0087 00--5/6 blank
|
|
