TM 9--2815--247--34
INTAKE AND EXHAUST VALVE CLEARANCE ADJUSTMENT -- CONTINUED
0014 00
Adjust -- Continued
5. Loosen intake valve adjusting screw lock nut (9). Turn valve adjusting screw (10) until clearance between valve
adjusting screw pad (11) and valve stem is 0.010 inch using thickness gauge blade (12).
6. Torque lock nut (9) to 200--225 lb--in (22.6--25.4 NSm) after correct adjustment is made. Make certain setting has
not changed after tightening lock nut (9).
Figure 9
11
9
10
12
NOTE
FOLLOW--ON MAINTENANCE:
Install valve adjusting access covers (WP 0036 00)
Install fans, covers, and top deck
(TM 9--2350--292--20)
END OF TASK
0014 00--3/4 blank
|
|
