TM 9-2815-250-24&P
3-19. FLOW CONTROL VALVE ADJUSTMENT (continued).
b.
Remove injector line fitting (3), O-ring (4), spring
guide (5), shim (6), spring (7), gasket (8), and
delivery valve (9) from injection pump outlet port
(10). Discard O-ring and gasket.
c.
Install fuel-testing device (13), adapter rod (12),
and indicator dial (11) in injection pump outlet port
(10).
d.
Remove three screws (18), nut (19), mounting
plate (17), and gasket (16) from crankcase (14).
Install screw (18) on auxiliary drive side of
mounting plate opening (15). Discard gasket.
3-61
|
|
