TM 9-2815-250-24&P
3-8.
FLYWHEEL, AUXILIARY DRIVE HARDWARE, AND FLYWHEEL HOUSING REPLACEMENT (continued).
5.
Remove oil drain plug (17) and gasket (18) from flywheel housing (19). Discard gasket.
NOTE
Pin for intermediate gear may come off with flywheel housing.
6.
Remove screw (14), 18 screws (15), 19 washers (13), and flywheel housing (19) from crankcase (10).
NOTE
There may be one or two gaskets on flywheel housing. Remove all of them, and
note how many gaskets are removed from flywheel housing.
7.
Remove one or two gaskets (11) from flywheel housing (19). Discard gasket(s).
8.
Remove O-ring (12) from flywheel housing (19). Discard O-ring.
9.
Remove seal (16) from crankshaft opening (20). Discard seal.
10.
Remove two screws (23) and washers (22) and plate (21) from flywheel housing (19).
3-29
|
|
