TM 9-2815-250-24&P
3-8.
FLYWHEEL, AUXILIARY DRIVE HARDWARE, AND FLYWHEEL HOUSING REPLACEMENT (continued).
b.
INSTALLATION
1.
Install two screws (23) and washers (22) and plate (21) on flywheel housing (19).
2.
Install new seal (16) in crankshaft opening (20), with lip of seal (16) facing inward.
3.
Install new O-ring (12) on flywheel housing (19).
3.
Depending on the number removed, install one or two new gaskets (11) on flywheel housing (19).
4.
Install flywheel housing (19) on crankcase (10) and secure with screw (14),18 screws (15), and 19 washers (13).
5.
Install oil drain plug (17) and new gasket (18) in flywheel housing (19) and crankcase (10).
3-30
|
|
