ARMY TM 9-2815-252-24
AIR FORCE TO 38G1-92-2
f. Remove cylinder covers, refer to paragraph 3-25.1.
g. Remove rocker levers and pushrods, refer to paragraph 3-26.1.
NOTE
There are three types of cylinder head bolts used. Note location of these for proper location
during installation.
h. Remove two bolts (3), two bolts (4), and four washers (5). Refer to FIGURE 3-27 and remove four bolts (7)
and spacers (8).
NOTE
check old gasket for number of identification holes; (i.e., one, two or three) this will aid
installation.
3-55
|
|
