ARMY TM 9-2815-255-24
AIR FORCE TO 38G1-95-2
MARINE CORPS TM 2815-24/4
FIGURE 3-9. Testing Diode-Trio
c.
Set multimeter for ohms and check rectifier bridge assembly (refer to FIGURE 3-10) by noting multimeter
indications between point A and each point C, and between point B and each point C. Reverse leads, repeat
checks, and note indications. If readings are the same in both directions for any diode, replace entire rectifier
bridge assembly. A good diode will have a high indication in one direction and a low indication in the other.
FIGURE 3-10. Testing Rectifier Bridge
3-31
|
|
