ARMY TM 9-2815-256-24
AIR FORCE TO 38G1-96-2
MARINE CORPS TM 2815-24/5
n.
If damaged, disassemble shut-off lever shaft assembly as follows, refer to FIGURE 3-65.
(1)
Remove socket screw (23, FIGURE 3-64), adjustment shut-off screw (24), and two lockwashers (25 and 26)
securing adjustment shut-off lever (27) to shaft assembly (30).
(2)
Remove two shut-off screws (28) and nuts (29) from shaft assembly (30).
FIGURE 3-65. Disassembly of Shut-off Lever
o.
If damaged, disassemble throttle shaft assembly as follows, refer to FIGURE 3-66.
(1)
Remove socket screw (31, FIGURE 3-64), retainer (32), spring (33), lever (34), adjusting arm (35), screw
(36), and spacer (37) from shaft assembly (18)
(2)
Remove screw (38), screw (39), and two nuts (40) from shaft assembly (18).
p.
If damaged, disassemble droop control (FIGURE 3-67) as follows:
(1)
Remove plug and sealing washer.
(2)
Remove locking cap (1).
(3)
Pull adjusting cap (2) straight out and remove seal (3).
FIGURE 3-66. Disassembly of Throttle Shaft Assembly
3-90
|
|
