ARMY TM 9-2815-256-24
AIR FORCE TO 38G1-96-2
MARINE CORPS TM 2815-24/5
FIGURE 3-105. Installing End Cap
NOTE
Tighten locking screw (2, FIGURE 3-73) 70 to 80 in-lbs (8 to 9 Nm).
co. Install new seal (4, FIGURE 3-73), retaining plate (3), and locking screw (2) in head, refer to FIGURE 3-106.
FIGURE 3-106. Installing Retaining Plate
NOTE
Tighten plug (89, FIGURE 3-64) 110 to 115 in-lbs (12.4 to 13.0 Nm).
cp. Install plug (89) and seal (90).
cq. Tighten both head locking bolts (53) 15 to 18 ft-lbs (20 to 25 Nm), refer to FIGURE 3-107.
3-122
|
|
