ARMY TM 9-2815-257-24 AIR FORCE TO 38G1-128-2 MARINE CORPS TM 10155A/2815-24/3 5-30 5-12.  FUEL INJECTION PUMP MAINTENANCE This task covers disassembly, cleaning, inspection, and assembly INITIAL SETUP Tools: Equipment Condition: Tool Kit, Master Mechanic (Item 3, App. B, Sect. III)     Fuel injection pump removed (Para. 4-12) Parts/Materials: Solvent, Dry Cleaning (Item 7, App. E) Rag, Cleaning (Item 8, App. E) A.    DISASSEMBLY. 1. Remove valve holder (1, Figure 5-22) from body (2).  Remove delivery spring (3). 2. Remove delivery valve (4) and gaskets (5, 6) from body (2).  Discard gaskets. 3. Disengage spring seat (7) from control lever (8).  Remove spring (9), pin (15), spring seat (10), and control lever (8) from body (2). 4. Remove snap ring (11).  Remove plate (12), gasket (13), and plunger (14) from body (2).  Discard gasket. B.    CLEANING.   Cleaning solvents are flammable and toxic to eye, skin, and respiratory tract.  Skin and eye protections are required when working in contact with cleaning solvents.  Avoid repeated or prolonged contact.  Work in well ventilated area only.  Keep away from heat, sparks, and open flame.  Do not smoke while using cleaning solvent.  Failure to observe this warning can result in injury or death to personnel. Clean components with cleaning solvent and a clean rag.  Allow to air dry. WARNING