ARMY TM 9-2815-259-24
AIR FORCE TO 38G1-125-2
MARINE CORPS 09249A/09246A-24
5-29
(10) Install thrust spring (1, Figure 5-34) on top of thrust washer (2, Figure 5-33). Install retaining ring
(2, Figure 5-34) using snap ring pliers (20044).
FIGURE 5-34. SPRING WASHER AND RETAINING RING
(11) Place new timing mark on hub as follows:
(a)
Place the rotor assembly onto the timing locator (20395) with drill point in rotor drive tang
aligned with tool pointer. Refer to Figure 5-35.
FIGURE 5-35. TIMING MARK LOCATOR
|
|
