ARMY TM 9-2815-260-24
AIR FORCE TO 38G1-126-2
MARINE CORPS TM 09244A/09245A-24
4-100
a.
Lift engine using the following steps;
(1)
Attach Engine Lifting Sling to engine lifting straps and overhead hoist on floor crane.
NOTE
Use of an engine lifting sling as shown in Figure 4-63 is the only
APPROVED method of lifting an engine.
FIGURE 4-63. ENGINE LIFTING
(2)
Carefully lift engine to desired location.
CAUTION
When servicing turbocharged engines on a rollover stand, disconnect
turbocharger oil inlet line from the oil filter housing or turbocharger before
rolling engine over. Failure to do so may cause a hydraulic lock upon
starting engine. Hydraulic lock may cause possible engine failure.
NOTE
Hydraulic lock is the event that occurs when trapped oil in the oil filter
housing drains through the turbocharger, to the exhaust and intake
manifolds, and into the cylinder head. After starting the engine, the
trapped oil in the manifold and head is released into the cylinder(s) filling
them with oil causing hydraulic lock and possible engine failure.
|
|