ARMY TM 9-2815-260-24 AIR FORCE TO 38G1-126-2 MARINE CORPS TM 09244A/09245A-24 5-98 (23) Install fuel filter, refer to paragraph 3.12.2. (24) Install fuel supply pump, refer to paragraph 3.12.3 (25) Install fuel lines,  refer to paragraph 3.12.4.   (26) Install oil cooler, refer to paragraph 3.11.3.   (27) Install new oil filter, and dipstick, refer to paragraph 3.11.5. (28) Install water manifold or thermostat housing and thermostats, refer to paragraph 3.8.2. (29) Install exhaust manifold, refer to paragraph 4.4.3. (30) Install turbocharger, refer to paragraph 4.4.1.  Prelube the turbocharger, refer to paragraph 4.4.1. (31) Install water pump, refer to paragraph 3.8.3. (32) Install hoses, refer to TM 9-6115-672-14. (33) Install crankshaft pulley, refer to paragraph 4.9.2. (34) Install vibration damper, refer to paragraph 4.9.1. (35) Install alternator, refer to paragraph 3.9.1. (36) Install fan and fan belts, refer to TM 9-6115-672-14. (37) Adjust valves, refer to paragraph 4.7.2. (38) Install rocker arm cover, refer to paragraph 4.7.1. (39) Install vent tube, refer to TM 9-6115-672-14. (40) Fill engine with clean oil and proper coolant, refer to TM 9-6115-672-14. (41) Perform engine break-in and standard performance checks, refer to TM 9-6115-672-14. 5.4.8   OIL PUMP ASSEMBLY. NOTE The following procedures require complete access to the engine.  If necessary, remove engine from generator set, refer to TM 9-6115-672-14.   Mount engine on repair stand (NSN 4910-01-016-1835 or equal) as outlined in paragraph 4.10.