ELECTRICAL LEADS MAINTENANCE

Custom Search

Back
Figure 5-4. Bus Bar Maintenance.

Up
TM-9-6115-666-13-P AN/MJQ-1612 60kW 50/60 Hz Power Plant Diesel Engine Driven 5 Ton Trailer Mounted Manual

Next
Table 5-1. Electrical Leads.

ARMY TM 9-6115-666-13&P

AIR FORCE TO 35C2-3-505-1

5.8. ELECTRICAL LEADS MAINTENANCE

This task covers:

a. Inspection

d. Repair

b. Removal

e. Installation

c. Test

INITIAL SETUP:

Tools

Equipment Conditions

Tool Kit, General Mechanic's

Reference

Both generator sets shut down, paragraph 2.7.1

Crimp Tool (item 4)

Multimeter, AN/PSM-45 (item 2, appendix B)

INSPECTION

Visually inspect leads for loose, broken, or corroded connections.

REMOVAL

1. Release strap securing top cover on switch box and remove switch box cover.

2. Remove six screws securing two clear plastic panel covers.

3. Refer to table 5-1 and FO-1, tag each end of lead to be replaced.

4. Disconnect and remove lead.

TEST

1. Set multimeter for continuity.

2. Refer to FO-1 and table 5-1 and check continuity of electrical leads.

REPAIR

Refer to appendix H and repair or manufacture lead.

5-12