DISASSEMBLY AND ASSEMBLY
Drain the coolant from the cooling system.
Remove the bolts and retainers to remove tube
(1) from the engine.
Disconnect hose assemblies (3) and (4) from the
governor. Disconnect hose assembly (2) from
the engine and remove it from the governor.
Remove bolts (5) that hold the governor fastener
group to the engine.
Remove bolts (7) to remove governor (6) and the
fastener group as a unit from the engine. The
weight of the unit is 23 kg (50 lb.).
Remove the bolt and remove lever assembly
(10) from the governor output shaft.
necessary, remove pin (11) from the lever
Remove bolts (8) and remove cover (9) from the
Remove seal (12) and the washer from cover