| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
FRONT DRIVE HOUSING
6.
Remove washer (7) from the inside of the
drive housing.
7.
Remove bolt (9) and washer to remove clip
(8) from the drive housing.
8.
Remove cover (11) from the drive housing
9.
Remove all of the bolts that hold the oil pan
to the engine. Install 3/8"-16 NC guide
bolts in each side of the oil pan. Fasten a
hoist to the engine and lift the engine
approximately 12E mm (0.5 in.) off of the
oil pan. Put two 50 mm.-66 wide x 100 mm
long x 6 mm thick (2 in. wide x 4 in. long x
l/4 in. thick) plates in position between the
cylinder block and the oil pan on each side
of the engine. Lower the engine on the
plates and remove the hoist. The weight of
the 3512 2 Engine is approximately 5443 kg
(12, 000 lb.). The weight of the 3508 Engine
is 4445 kg (9800 lb.).
NOTICE.
Fuel control linkage (10) must be
moved for clearance to pull the front
drive housing from the engine or
damage to parts can be the result.
10. Fasten a hoist to front drive housing (12)
with tooling (A). Remove bolts (13) and the
remainder of the bolts that hold housing
(12) in_
1 position. Remove front drive
housing (1 2) from the engine. The weight
of the housing is 209 kg (460 lb.).:
359
|
||
|
||
