TM   5-2815-241-34&P ANEROID   CONTROL   VALVE   -   CONTINUED ACTION LOCATION ITEM REMARKS DISASSEMBLY 1.  Aneroid  control valve (1) Pipe plugs (2 and 3) 2. Tubing  nut  (4)  and Using   9/16-inch   box-end   wrench,   loosen tubing  (5) and take off. 3. Lead  seal  (6)  three screws  (7)  three lockwashers  (8) and  lock  wire  (9) 4. 5. Bellows  cover  (10) Screw  (11)  and Using   7/16-inch   box-end   wrench,   unscrew lockwasher  (12) and take off. a. Using   3/16-inch   hex   wrench,   unscrew and  take  out. b. Drain oil into drain pan. a. Using  diagonal-cutting  pliers,  cut  lock wire and take off. b. Using  7/16-inch  box-end  wrench,  un- screw  and  take  out. Discard  lockwashers  and  lock  wire. Using  plastic-faced  hammer,  tap  gently  and take off. Discard   lockwasher. T A    2 4 2 6 0 4 2-399